Cameron NuFlo Turbine Flow Meter – 4" (P/N: 9A-100012085) The Cameron NuFlo 4-inch Turbine Flow Meter (EZ-IN® Series) is a high-capacity axial turbine meter engineered for accurate volumetric measurement of clean liquid flow in large-diameter pipelines. With a 12-inch stainless steel body and between-flange installation, it ensures dependable performance in harsh industrial environments. Designed for ease of maintenance, it supports direct integration with NuFlo electronics and instrumentation. This meter is ideally suited for oil & gas, water injection, chemical, and general processing applications. Technical Specifications: • Manufacturer/Brand: Cameron (NuFlo Measurement Systems) • Part Number: 9A-100012085 • Series: EZ-IN® Series • Type: Liquid Turbine Flow Meter • Meter Size: 4-inch bore, 12-inch body length • End Connection: Between-flange (ANSI Raised Face or Ring Joint) • Body Material: Stainless Steel • Measurement Principle: Axial turbine, velocity-based • Signal Output: Frequency pulse (magnetic pickup coil) • Nominal Flow Range: 100 to 1,200 GPM (22.71 to 272.55 m³/h) • Calibration Factor: Approx. 30 pulses per gallon • Max Output Frequency: 600 pulses/sec • Pressure Drop at Max Flow: 10 psi (69 kPa) • Working Pressure: Up to 6,170 psi (based on flange class, e.g., CL2500) • Temperature Range: -20°F to 450°F (-29°C to 232°C) with suitable pickup coil • Accuracy: ±1.0% of reading (standard), ±0.5% optional (industrial grade) • Repeatability: ±0.1% • Compatible Pickup Coils: 9A-100002077 or 9A-100002076 • Mounting Orientation: Horizontal or vertical (upward flow) • Typical Applications: Crude oil, produced water, refined hydrocarbons, chemicals • Compliance: ASME B31.3, ANSI B16.5, NACE MR0175 / ISO 15156 (as applicable).