Product Specification Mesin Incenerator Limbah Pabrik

Factory Waste Incenerator Machine
Incinerator for Medical Waste
Capacity of Incinerator: 20 kg / batch
Equipped with Heat Part Retaining and Raticolo Horja
Type of Waste: Medical Waste, Hospital Waste, Health Center Waste, Health Clinic Waste
Operating hours: 8 hours per day
Minimum waste caloric value is 5,600 kCal / kg
Waste water content: 15% maximum
Density / Waste Species Weight: 1 to 1.15

a. Main Body (Main Body):

Burn Room Volume
First combustion chamber: 0.5 m3
Second Combustion Room: 0.18 m3
Operating Temperature in Combustion Chamber 1: Minimum 800 Deg C

Burning dimension
First Burn Room: LxWxl = 900 x 700 x 800 mm
Second Burning Room: LxWx = 680 x 355 x 800 mm
Operating Temperature in Combustion Chamber 1: Min 1000 Deg C
Equipped with Retaining Heat Part, Peep Hole

Has a Mixing Room: 680 x 230 x 800 mm

Main Material of the Combustion Unit:
   - Wall: 4mm thick carbon steel plate
   - Floor: 4mm thick Carbon Steel Plate
   - Joint Flange thickness: 10mm
   - Burner Port thickness: 6mm
   - Frame: CNP 80/50, other elbows and pipes
   - Padeyes: Plate Carbon Steel thickness: 10 mm
   - Cat: Epoxy Paint for Carbon Steel Material 60µ DFT

Air Pressure in the Combustion Room: Negative Pressure

Size of Incinerator (Main Unit): 203.5 x 103.8 x 104 cm

b. Exhaust Ducting:

Exhaust Ducting Material: 2mm Stainless Steel
The outside is coated with 2.5 cm Calcium Silicate
0.6 mm aluminum clading end cover

c. Air Pollution Control (APC):
   - Type: Wet Water Scrubber
   - Equipped with Raticolo Horja
   - Material Body Scrubber: 304 Stainless 2mm and 3mm thick
   - Material Structure: Mild Steel / Carbon Steel
   - Wet Water Scrubber System: Cyclon
   - Scrubber size: 760 Dia x 3600 mm
   - Dust Catcher Nozzle: 1/2 "
   - Water Flow Rate for spraying on average: 7,500 liters / hour
   - Water Circulation Bathtub: 2400 x 1200 x 800 (By Civil)

d. Chimney:
Material: Stainless Steel 2mm thick
Chimney Size: He is 280 mm
Ground Chimney Height: 14 meters
Equipped with a sampling hole: Pipe him 2½ "
Sampling Sampling Hole Location: 8DE / 2DE
Equipped with Platform and Handrail Sampling

Buffer Structure:
Material: Carbon Steel Plate, Elbow
Height: minimum of 5.8 meters
Stairs: Elbow 50 x 50 x 5
Stack is equipped with 3 side stiffening wire slings

e. Refractory / Insulation / Brick Fire / Castable:
Wall and Plenum Coated combustion chamber:
   - RockWool: minimum density of 50 kg / m3, 2.5 cm thick
   - Ceramic Fiber density 20 kg / m3, 2.5 cm thick
   - Fireproof brick: SK 34, 11.5 cm thick
   - Combustion Floor: SK 34 Insulation Brick and Fireproof Brick
   - Burnert Port and Exhaust Collar: Castable CAJ 14

f. Burner
Type of Fuel: Pertamina Diesel
Types of Burners: Diesel Oil Burner
   - Burner Burner 1: Gun type an average of 67 kW
   - Burner Burner 2: Gun type on average 50 kW
Solar Fuel Consumption: Average to 12 Liters / Hour
Solar Oil Fuel Tank:
   - Tank capacity: minimum 175 Liter
   - Tank Material: 2 mm thick Carbon Steel Plate
   - Equipped with Level Indicator and Drainage
   - Galvanize Pipe SGP diameter ½ inch, Valve and Fitting

g. Air Blower
Type of Air Blower: Centrifugal
Air Blower Material: Metal
Air Blower Size: Suction 3 "

h. Electrical and Instruments:
Electric Power Needs min. : 1300 Watt / 220 Volt / 1 Phase
System Control:
   - Automatic Panel, Automatic Panel Control
   - 3 Degrees of Thermocouple Type K 1200 DegC
   - Equipped with a Limit Switch to open the door

i. Waste / Waste Feeding System
Wrapped garbage is put into the combustion chamber 1: Manual
Lots of garbage inserted:
   - Maximum volume of 1/3 of the contents of the combustion chamber 1
   - Does not exceed heavy capacity
   - Solid waste must be smaller particles

j. Dust Collection System
Ash: about 10% depends on solid content material
Ash Expenditure System: Manual
Equipped with a hoe rifle

k. Need for Incinerator Operator Technicians:
   - Certified from KMU Horja
   - Operators have passed the training
   - Number of Operators: 1 person
Equipped with :
   - Helmets, Shoes, Uniforms, Mouthpiece Masks, Gloves

l. Protective Buildings (Not Included) Civil Works.
Land Size Requirements:
   - Main Unit: 5.78 m x 4.54 m
   - Chimney: 2 m x 2 m
   - Water Circulation Bath: 2.4 x 1.2 x 0.8 m

Total Weight: ± 7,074 kg

Incinerator Machine

Price Mesin Incenerator Limbah Pabrik

: Rp927.000.000

Dapatkan penawaran terbaik untuk
Mesin Incenerator Limbah Pabrik !

Request Quote

Other Related Products From PD. Karya Mitra Usaha

Road Markings Machines Manado
Road Marking Machines

Rp 123

Mesin Incinerator Limbah Medis Kapasitas 100 kg
Incinerator Machine

Rp 2,150,000,000

Price Engine Preheater Road Markings
Road Marking Machines

Rp 15,000,000

We are an Online Media that consists of Distributors, Resellers, Manufactures, Suppliers, importers and exporters. If you are interested to buy Mesin Incenerator Limbah Pabrik cheap, please contact the Company directly.

If you are a Company who wished to sell your product,

Other Companies Related to Karya Mitra Usaha

PD. Karya Mitra

Verified Supplier
Indotrading gold member
2 Year
Response Rate 100%

CV. Kencana Jaya Teknik

Verified Supplier
Indotrading gold member
2 Year
Response Rate 100%

PT. Metalindo Prima Engineering B

Verified Supplier
Indotrading platinum member
3 Year
Response Rate 100%