Sell LATHE MACHINE CH430x1000 from Indonesia by CV. Visi Indotama Sejahtera,Cheap Price

Product Specification LATHE MACHINE CH430x1000

Lathe Machine CH430 x 1000


  • 12 steps spindle speed to shorten the processing time of all size workpieces. (3 steps for variable series)
  • 58 mm spindle bore which allows larger mandrels to be machined.
  • Stand – alone electrical box with overload protection device is easier to maintain and safety.
  • No need to exchange the gear while switching the system by using this common use gearbox which also has advantages like with low noise, safety cutting protection device on gear and using cycling lubrication system.
  • All the gears in headstock are carburized by heat treatment and grinded accurately in order to extend life of lathe.
  • Strong tailstock with large shaft diameter, special design center and anti-stroke device to prevent the tailstock sleeve dropping of.
  • Closed – type oil immersion system which provides better lubricating results in Apron.
  • Longer tool holer travel to meet the processing needs.
  • Foundation bed is made by one piece molding and the bed is grinded accurately and made by high – frequency heat treatment.
  • Foot emergency stop device which could also cut off the main power at the same time to ensure the safety of the operator and lathe.
  • Gap could be removed accordingly to machining langerworkpieces.



Lathe CH430 x 1000 specification :


Lthe :                                      

Center height                                      215 mm

Swing over bed                                    430 mm

Swing over gap                                    660 mm

Swing over cross slide                         245 mm

Distance between centers                  1.000 mm

Bed width                                            300 mm                      

Bed length                                        1.950 mm


Spindle :

Spindle bore diameter                        58 mm

Spindle nose                                        A1-6 or D1-6

Spindle taper                                       MT#6

Spindle speed                                      20⁓2.000 RPM (12 steps)                  

Spindle Speed *Variable series           H : 586⁓2.300 RPM   M : 157⁓586 RPM

                                                        U : 20⁓157 RPM (3 steps)


Carriage :

Cross slide travel                                 250 mm

Tool holder travel                               180 mm

Cutting tool size                                  25 x 25 mm


Tailstock :

Spindle diameter                                 58 mm

Spindle travel                                      150 mm

Center taper                                        MT#4


Threading & Feeding :

System                                                 Metric, Inch, Mixed

Dia, of leadscrew                                Dia. 35                        

(Metric) pitch of leadscrew                6 mm/pitch

(Inch) pitch of leadscrew                    4 TPI

Metric pitch threads                           0.5⁓7 mm (22 kinds)

Inch pitch threads                               4⁓56 TPI(36 kinds)

Module pitch threads                          0.5⁓3.5 M.P. (12 kinds)

Pitch thread diameter                         8⁓56 D.P. (21 kinds)

Longitudinal feeds                               0.05⁓0.07 mm/rev

Cross feeds                                          0.025⁓0.35 mm/rev


Motor :

Main motor                                         5 HP

Inverter motor *Variable series         7.5 HP

Coolant pump motor                           1/8 HP


Floor space (Length x Width)                                      210*65 cm     

Net weight                                                                   1.600 kgs

Pallet size (Length x Width x Height)                          227*103*172 cm



VISI INDOTAMA SEJAHTERA has collaborated with several metal industry machine manufacturers to meet the needs of the Customers in terms of Lathe Machine needs.

As local partners and authorized distributors, we provide Technical Support that is reliable enough to serve our loyal customers.


VISI INDOTAMA SEJAHTERA  is a stockist and supplier of engineering metrial for the Metal Industry and Maintenance needs. With our best service and good technical support, we are ready to serve and become a reliable partner to move forward with you.

The following are the industrial sectors we have served:
1. Houseware industry.
2. Steel and Non Ferro industry
3. Glass industry
4. Jewelery industry.
5. Automotive parts industry.
6. Mold & Die industry.
7. Precision Engineering industry.
8. Marine Products industry.
9. Food and Medicine Industry.

If you need other information, please look at

Price LATHE MACHINE CH430x1000

CV. VISI INDOTAMA SEJAHTERA is a stockist and supplier of engineering materials. We were incorporated in 2009 and strongly grow to serving customers and provide an ever expanding range of products and services to a demanding market. Industrial Sectors Reference: 1. Houseware industry. 2. Jewellery industry. 3. Automotive part industry. 4. Mould & Die industry. 5. Precision Engineering industry. 6. Marine Products industry.

We Sell
  • Karbon Grafit
  • Industrial Oil
  • Industrial Lubricant
  • Aluminium Alloy
  • Copper
  • Cutting Tools

Dapatkan penawaran terbaik untuk

Request Quote
We are an Online Media that consists of Distributors, Resellers, Manufactures, Suppliers, importers and exporters. If you are interested to buy LATHE MACHINE CH430x1000 cheap, please contact the Company directly.

If you are a Company who wished to sell your product,
Contact Supplier
Visi Indotama Sejahtera

3 Year This Company is a Paid Diamond Member in We have verified the Address and the Actuality of this Company.
Response Rate :
JL. Nanas Utara II/32 (Gardenia) Pondok Candra Indah, Waru Sidoarjo, Jawa Timur - Indonesia

Other Companies Related to


Verified Supplier
Response Rate 100%

CV. Waja Intan

Verified Supplier
Response Rate 100%


Verified Supplier
Response Rate 100%