Mandiri Jaya Engineering field tool store presents Dial Indicator Digital Mitutoyo with
- Brief as indicator of serial number 2.
- Large LCD and easy to read.
- Assessment of GO / ± NG can be done by setting tolerance limits on and
under. The judgment results (GO / ± NG) can be displayed in full size.
- Positive / negative calculation due to movement up / down spindle can toggle.
- Internal calculations using the simple formula [F (x) = Ax) are available
Using the ABSOLUTE linear encoder, ID-C always shows the position
"Absolute Position" from the origin on power-on. Also no response speed
Limited eliminates over-speed errors.
- The face of the ID-C indicator can be rotated 330 ° to the appropriate angle for ease
- With SPC data output.
- Resolution: 0.01mm, 0.001mm, .0005 "/0.01mm, .0001" /0.001mm or .00005
- Display: LCD
- Standard length: ABSOLUTE capacitance type capacitive encoder linear
- Max. Speed of response: Unlimited
- Measuring strength: See the list of specifications
- Battery: SR44 (1 pc.), 938882
- Battery life: Approx. 5,000 hours under normal use
- Dust / Water protection level: IP42 or IP53 (dust-proof type)
- Setup-Set / Preset, Zeroset, GO / ± NG, Calculate direction switching,
Power ON / OFF, Output data, inch / mm
- Conversions (inches / metric models only)
- Alarm: Low Voltage, Calculate value composition error, Over-
Flow, tolerance limit setting error
- Depth Measuring Tool which uses internal calculations with
Using the simple formula [F (x) = Ax) is available