ASPHALT / CONCRETE CUTTER
CAPACITY : STANDARD 16 INCH ( UP GRADE MAX BLADE 20" )
- Dimensions (L x W x H): 1077 x 540 x 965
- Weight: 120 Kg
- Blade Size: 14-16 inches ( INCLOUDED - Free 2 Pcs )
- Cutting Depth: 70-145 mm
- Arbor Size: 27 mm
- Adjusting for Cutting Depth: Manual Lifting Screw System
- Cooling System: Centrifugal Injection Type
- Water Tank Capacity: 45 Liter
- Power Source: Engine 8-13 HP ( POWERED BY HONDA )
Concrete Cutter is a tool / machine construction that is used to cut road Asphalt, Concrete Castings, Ceramic, with a depth capacity adjusted with Blade Cutter (Blade Concrete Cutter)A concrete saws (often known as consaw or street saw) is a power tool used to cut concrete, stone, brick, asphalt, tile, and other solid materials. It could be a small hand-held cut-off saw, a large
walk-behind saw or other styles, and it may be powered by gasoline, hydraulic or pneumatic pressure, or an electric motor. saws used on concrete saws often diamond saw blades for cutting concrete, asphalt,
stone, etc. Abrasive wheel cut-off can also be used in cut-off saws for cutting stone and steel. Significant friction generated in cutting hard materials such as concrete typically need a knife to
be refrigerated to prolong their life and reduce dust.
Choosing the right diamond blade saws for concrete saw is a necessary condition to perform the task of cutting both. Apart from some basic aspects, for example, what diameter diamond saw blade can accommodate
concrete saws, arbor size and quality of this knife, there are several other important aspects that must be considered:Match diamond saw blades features and types of concrete / asphalt. For example, some of the concrete has a steel rod in it (reinforced concrete) and some have not. some stone aggregate concrete 'gravel and
crushed stone some. some concrete curing time 'long (cured concrete) and a couple of short (green concrete). Diamond blade saws must have a different design in accordance concrete and asphalt.
There are the following ways to reduce or control dust:
wet cutting with adequate water supplies.
If possible, a diamond saw blade to be used as a substitute abrasive saw blade for cutting. Diamond saws typically cut more quickly than abrasive blades while requiring less water.
Concrete saws should have local exhaust ventilation (LEV) systems, which can capture some of the dust emitted during the cutting operation.
When operating, the operator should always wear personal protective equipment (PPE).There are some other risks during the cutting process which also needs to be controlled to protect the operator and passers-by, for example, noise, debris flying, hand-arm vibration, manual handling,
electrical and refueling.
CONTAC US : 021--2273.7666
PIC Marketing : Anto // Irma
TELKOMSEL : 0822-600--88165 ( WA ) / 0812-853--90966
EMAIL : firstname.lastname@example.org