How to use
CDO-804 products can be used by spraying, soaking and circulation, can be mixed with hot water.
Without being diluted, CDO-804 is sprayed evenly into the dirty part.
Leave for 15 ~ 20 minutes then wash with clean water.
For thick dirt, do it by rubbing it during the washing operation.
Dip the part that will be cleaned into CDO-804.
The concentration of the solution depends on the available impurities, for thick fat impurities, use CDO-804 without dilution, and for mild to moderate impurities, use a solution with a concentration of 30% CDO-804 products mixed with water.
Rinse with water after finishing immersion.
This method can be done on a heat exchanger, cooling water system, etc.
Mix 8% CDO-804 solution with water.
Circulate for 4 ~ 6 hours, heat to 60oc (if possible), then drain and rinse with water.
Security and handling
Store in a place free from sources of fire and excessive heat.
Wear rubber gloves, masks, protective clothing, when handling this product.
Avoid contact with the skin, and do not get into the eyes.
Shape and color: clear liquid
Specific gravity: 0.85 ± 0.07 in 20oc.
Flash point: non
Stability in cold conditions (-5oc) does not change form.