Welding Holder in Indonesia

The WIDOS 35XX is an all-rounder. The clamping tool of the WIDOS 35XX can be shifted resp. rotated completely. Especially, short pipe pieces can be welded. The machine is very lightweight and compact. Optionally, the machine can be used for the most simple version of manual butt welding; corresponding attachment plates for the heating element are a

The hand-held heating tools are destined for anti-stick coated spigot and sockets from OD 20 up to OD 63 resp. OD 20 up to OD 125. The Weld It size 1 and the Weld It size 2 have a digital display and pushbuttons for the temperature setting. For support on the building site or in the workshop one holding device is included with the heating tool. Eve

The WIDOS 12000 WM is a manual welding machine for the heating element butt welding of PE and PP pipes from OD 500 up to OD 1200 and for the rational fabrication of fittings e.g. bends, T- and cross-pieces (OD 630 up to OD 800/1200) of the highest quality in the workshop. The table drive enables by a steady running a precisely controllable and high

The WIDOS RS 630 is a sawing installation for the cutting of plastic pipes up to OD 630. The pipe supports with 1.8 m length have an extremely solid design so that even heaviest pieces can be clamped safely and displaced on the exchangeable sliding coatings with minimal expenditure of force. Extensions for the pipe supports are available as option.

The WIDOS ASM 160 is especially designed for the heating element saddle welding of reduced branches from OD 75 up to OD 160 without diameter limitation of the main pipe. Based on the fully approved WIDOS Maxiplast with fine scale for the actual forces during heating and welding procedure this machine is just equipped with one clamping tool as well

The WIDOS 4000 WM is made for the rational fabrication of high-quality fittings like bends, T- and cross-pieces in the workshop. It is possible to process and produce pipes and fittings out of PE, PP and PVDF from OD 90 up to OD 315. The solid and optimized clamping tools can be unfolded and operated very quickly with only one spindle. For the fitt

The WIDOS 2500 is a handy, mobile plastic welding machine for the use in the workshop. Particularly suitable for sanitary installations, wastepipes or as basic unit for special purpose.The WIDOS 2500 has an electrically operated planer, electronic heating element as well as transport and mounting crate for a safe, clean and protected storage and is

The WIDOS 24000 is developed for the heating element butt welding of PE- and PP-pipes and fittings. It is a very solid and extremely rigid machine. Thus, you can work even under difficult conditions on the construction site and in the trench. The hydraulic unit moves the right double clamping device and controls the joining force precisely. It has

The WIDOS 16000 is developed for the heating element butt welding of PE- and PP-pipes and fittings. It is a very solid and extremely rigid machine. Thus, you can work even under difficult conditions on the construction site and in the trench. The hydraulic unit moves the right double clamping device and controls the joining force precisely. It has

The WIDOS 6100 can be used to process pipes and fittings out of PE, PP, PA and PVDF from OD 315 up to OD 630. The WIDOS 6100 features a double clamping device with quick clamping on the fixed and on the movable side. These are guided by 2 shafts. There are 2 flexible hoses with quick-action couplings for the connection to the hydraulic control unit

PT Purwo teknik menjual dan menyediakan berbagai macam jenis kebutuhan untuk industrial anda Welding Holder

The WIDOS Miniplast/2 is a welding machine for the heating element butt welding of PE, PP and PVDF pipes and fittings from OD 20 to OD 110. Due to its light and compact construction, the machine is ideally suited for the use in pipeline systems and for assembly work. In case of stationary use, the machine can be fixed in the vice or with the table

he WIDOS 4900 can be used to process pipes and fittings out of PE, PP, PA and PVDF from OD 90 up to OD 315. The WIDOS 4900 features a double clamping device with quick clamping on the fixed and on the movable side. These are guided by 2 shafts. There are 2 flexible hoses with quick-action couplings for the connection to the hydraulic control unit.