Power Plug

How to Attach the Cable to the Power Plug

One of the important parts of this electric tool is widely used and needed in various industries such as switches, electrical panel boxes, relays, panel assembly, panel meters, temperature switches, KWH meters and so on.

1. Unscrew Bolt

The first step in wiring the power plug is to unscrew the locking bolt that wraps the plug. Although they have different shapes and models such as the Dexicon power plug, Lexticon power plug, Scheneider power plug, Broco power plug, Loyal lostrik plug, legrand power plug. The goal is to be able to see the inside of the plug and make wiring easy. After that unscrew the cable fastening clamp bolt.

2. Peel the Cable End

After that you have to peel the end of the cable that will be attached to the plug. adjust the stripping end of the cable to your needs. then you install one by one according to the available terminal.

3. Attach Cable

Next start wiring. Attach the ground wire to the ground terminal. Also the next cable that must be installed according to its terminal as well. Presence and neutral wires are attached to the ends near the metal legs. aga

4. Terminal Bolt Lock

Next after the installation is complete, make sure you close and lock it back firmly. Make sure you also re-attach electrical accessories such as bolts to the cable tie clamps so that the attached cables are not pulled when the socket or terminal is used.