How to Installation Mounting Bracket1. Prepare a tool for mounting bracketBefore you install a mounting bracket for various needs. Make sure to prepare some of the necessary tools, including: English key, measuring instruments or meters, screwdrivers, electric drill, hammer and pencil.2. Prepare the boltReady the bolt with a size that matches the mounting bracket that is about to install. The use of the correct bolt size will affect the bracket strength. The corresponding bolt makes the bracket more sturdy and not easy to fall.3. Measure the height of the wallThen measure the height of the wall you want to install your mounting bracket. Make sure the height of the wall mounting bracket is in accordance with the needs.4. Mark 4 holesAfter you find the right height, then you can mark it with a pencil. You can mark 4 holes on the wall that will be drilled later as the mounting bracket installation. For this way you can use the help of waterpass so that the bracket is not installed tilted.5. Drill 4 holesIf you feel the 4 hole mark is right, then you can continue with a 4-point drill that you have marked by using a drill eye that must match the size of your bolt.6. Enter FischerThen enter Fischer on the 4 wall holes that you have made, install the mounting bracket plate and enter the ring first then the bolt into the fischer. Taken bolts using a screwdriver. Make sure the mounting bracket. It doesn't sway after tightening to reduce the risk.7. Install 2 poles of mounting bracketsIf the mounting bracket dish is installed firmly on the wall, then you have to install 2 mounting bracket poles parallel to the TV back hole. Make sure you put up with the right and appropriate bolt. Tighten the bolt using the English key until it is strong and not sway.
© 2015-  Indotrading - Indonesia B2B Marketplace.
All Rights Reserved.
Click the number to directly contact the supplier
Anda hampir selesai membuat RFQ