How to Operate Rice Processing MachineRice processing machine is a machine that functions to process rice from the stalk, so that it can separate the grain from the straw. How to operate it must also be considered so that the rice can fall out perfectly from the grain. Here's how to operate the rice processing machine: 1. Make sure the rice processing machine is placed on a flat place. And make sure that under the machine and its surroundings are given a base such as a tarpaulin to catch the drop of grain in order to reduce crop yields due to shrinkage. 2. Adjust the position of the rice processing machine properly and correctly so that the dirt will come out in the same direction as the wind. 3. So that yields are not reduced, try to position the rice processing machine facing the direction that has been covered by bamboo that has been given plastic or boards so that the rice is not scattered. 4. Turn on the rice processing machine, and wait a moment before starting to load, this is to check the position of the rice processing equipment. Do not let the position of the tool move or shift due to vibration. 5. Check the ability of the tool by adding grain little by little. If there are grains of rice that have not been separated from the grain, increase the rotational speed (rpm) of the thresher drum on the machine. 6. Open the cover of the rice processing machine, and check the drum and all the thresher teeth, clean if there is any dirt. Rotate the threshing drum by hand to ensure that nothing comes loose and rubs against it. 7. If the process is over, immediately clean the rice processing machine. cleaning needs to be done so that there are no grain flakes that can enter the engine components and hinder the performance of the rice processing machine.
Click the number to directly contact the supplier
Anda hampir selesai membuat RFQ