Milling Machine Maintenance Tips In order for the milling machine to work optimally and perfectly, maintenance is needed. Following are the treatments for milling machines that you can do every six months. 1. Clean the bottom of the motor and blow the air duct. Check the tightness of the lower fastening bolts. 2. Clean the terminal box (plug) and check the connecting terminal (plug), clean with a silica gel dryer. 3. Check the insulation resistance and winding continuity with a 500 V megger and record the reading before installing the terminal box cover. 4. Check the ground connection safety connection. 5. Lubricate the motor bearings with a suitable lubricant. 6. When the motor has been installed with the bearings, drain the oil from the bearings, check the bearing movement and print the readings before installing. 7. Clean the bearing with an oil rinse and refill it to the limit, using oil according to the specified level. 8. On motors with bearings, check for visible air gaps in all parts and record the results. Check the alignment of the motor clutch. That's the milling machine maintenance that you can do every six months. In addition to optimal maintenance, make sure to use quality milling machines such as orion milling machines, vertex milling machines, and duyuen milling machines.
Click the number to directly contact the supplier
Anda hampir selesai membuat RFQ