Although terminal connectors are included in cable connector types such as RJ 45 connectors, male connectors, and fiber optic connectors. Because the terminal connector is used to connect and isolate. To make it easier for you about the types of terminal connectors, the following is the discussion. 1. Multi-wire Connector Although the simple cable terminals just described are really wire connectors, the term connector is usually used to describe multiple wire connector plugs. This type of plug is used to connect the cable to the switch. 2. Bulkhead Connector Some special connectors, called bulkhead connectors or bulkhead disconnectors or bulkheads, are used where a number of cables have to pass through an obstacle such as a firewall (see figure above). Bulkhead connectors are installed in the firewall and several connectors are plugged into each side to connect cables from the engine and front accessories to cables in other parts of the car. 3. Weatherproof Connector Special weatherproof or wearerproof connectors are used in the engine compartment and seat belts of latem GM cars. This type of connector has a rubber seal at the end of the terminal wire, with a secondary seal cover on the back of each half of the connector. Such connectors are particularly useful in electronic systems where moisture or corrosion of the connectors can cause voltage drops Terminal connector products that you can make reference when buying terminal connectors such as kennedy terminal connectors.
Click the number to directly contact the supplier
Anda hampir selesai membuat RFQ