Globe Valve

Types of Globe Valve

Globe Valve is a linear motion valve and is designed to stop, start and regulate flow. Commonly used as linear motion valves, globe valves come in 3 types which have different standards and placements in different systems. To make it easier for you, here's the discussion:

1. Globe Valve Design Tee Pattern (Tee Pattern)

The tee pattern globe valve is a common type that is widely used, the diaphragm is shaped like the letter Z. The horizontal seat arrangement allows the rod and disc to move in a straight line in a horizontal line.

2. Globe Valve Design Angle Patern (Angle Pattern)

The Globe Valve type of Angle Pattern design is a modification of the Tee pattern design. The tip of this type of blobe valve is at an angle of 90° with the flow flowing at an angle of 90°. This design pattern has a slightly lower coefficient than the Wye pattern (the third type of design). This type of design can be used to handle the slugging effect of this type of flow.

3. Globe Valve Design Wye Pattern (Wye Pattern)

This type of wye pattern design is an alternative to the high pressure drop, which exists in globe valves. The 45° angled seat and stem allow for upright flow in the fully open position and exhibit little resistance to flow. Widely used as throttling during temporary operation/start up.

That's a discussion of the types of Globe valve designs that are commonly used. If you need a quality globe valve. You can use globe valves from globe valve castel, globe valve kitz valve, and globe valve gates.