Quick Tips for Gate Valve Repair
In its use, gate valves are the same as other types of valves such as check valves, butterfly valves, control valves, globe valves, industrial valves, air valves, foot valves and others, which may not necessarily cause damage. For that, you must make sure you know enough information as well to repair the damage quickly.
Here are quick tips to repair a problematic gate valve:1. Gate Valve Identification
First you need to identify the problems that arise in your gate valve. That way you can move on to the next stage of repair. Usually the problems that arise in the gate valve include the valve not closing properly, leaks in the valve stem bolt loose, difficult to remove the seat, damage to the valve shaft and so on. First identify the problem with your gate valve.2. Prepare the Equipment Needed
Next, after identifying, make sure you have all the tools needed in the repair process available. Among the equipment needed are ring wrenches, pipe wrenches, snappers, tools such as hammers, screwdrivers, pliers, rust oil or lubricating oil, sandpaper, and other supporting tools.3. Disassemble the Gate Valve
Then you can directly repair the gate valve by dismantling the gate valve in the early stages. At this stage you can remove and disassemble the valve parts. Once all the valve parts are removed, you need to clean the parts. Then you can fix the problem focus area on the valve section.
© 2015-  Indotrading - Indonesia B2B Marketplace.
All Rights Reserved.
Click the number to directly contact the supplier
Anda hampir selesai membuat RFQ